| After-sales Service: | Online Technical Support |
|---|---|
| Warranty: | Five Years |
| Type: | Roofing and Waterproofing |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier water based polyurethane waterproof coating is single component emulsion polymer waterproof coating ,its basal component is polyurethane emulsion. And the greatest advantage is friendly to environment..
| Product Name | POLYURETHANE WATERPROOF COATING |
| Size | 10kg, 20kg and so on |
| Color | white, blue, grey , black, green and so on |
| Type | water-based, environmental friendly |
| Appearance | Colorful |
| Tensile strength (Mpa) | ≥1.0 |
| Impermeability (0.3Mpa,30min) | no leakage |
| Solid content ≥ | 65% |
| Resistance to crack | 4.5-6mm |
| Elongation at break ≥ | 300% |
| Flexibility at low temperature | -20ºC |
1.It is used for sloping roof ,wall surface and especially various irregular roof.
2.Basement ,kitchen ,wash room ,reservoir ,swimming pool and decorative roof requirement.
3.Cement board ,asbestos product , ceramic ,floor tile ,wood floor ,air-raid shelter ,color steel tile ,
4.tunnel ,subway ,concrete floor ,pipe and so on.
1.Environment friendly , non-toxic ,non-odor and no pollution
2.Excellent tensile strength , elongation and waterproof performance
3.Good resistance to aging ,alkali and acid
4.Easy to apply and long service life
1.Sprinkle some water on the basement or roof before work begins, let the base absorb a little water to facilitate the construction
Remark : just keep the base moist, not too much water
2.Take out a few bucket of coating(according to the construction area), add water to dilute , mix evenly with agitator, let coating become very thin. Then brush it on the roof or base . its purpose is to clean up the dust of the base or roof.
Remark : you can put more water in the coating to make it thin. It only acts as a base cleaner
Not use primer is also ok .
3.It is best to brush 3-4 layer ,but each layer must be brushed very thin(0.2-0.3mm per layer), so that each layer of coating dry faster, better waterproof effect . (if you want to brush total 2-3mm thickness, you can brush 5-6layers.)
Remark : if the sun is vey hot and the temperature is very high at noon , don't work , you can arrange work in the morning and afternoon .
4.After the first layer is curing or not stick your hand,(interval time : 4h-8h, or according to your local temperature)do the second layer ,And the second should be at right angle to the first layer. The third and forth layer use the same method
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}