Chinese Supplier Resistance to Surface Wear Flame Retardant EPDM Rubber Waterproof Membrane for Roof Waterproofing

• Customization: Available
• After-sales Service: Online Support
• Certification: CE, ISO, ISO, MSDS, CE
• Model NO.: JLY-EPDM001
• Thickness: 1.2mm, 1.5mm, 2mm, 3mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm
• Application: Roof, Underground, Reservoir, Bridge
• Certificate: CE, ISO
• Tensile Strength: 7.5MPa
• Weather Fastness: Ultraviolet Light Hypothermy
• Environmental Protection: Conform to
• Type: Waterproof Roll Material
• Ceiling Tile Shape: Roll
• Function: Waterproof
• Color: Black
• Usage: Outdoor, Indoor
• After-Sales Service: on-Line Support
• Warranty: 5 Years
• Material: EPDM
• Transport Package: Pallet, Plastic Bag or Customized
• Specification: 40kg 50kg/roll
• Trademark: Jin Lu Yang
• Origin: Shandong, China (Mainland)
• HS Code: 3921909090
• Production Capacity: 200000 Square Meter/Square Meters Per Day
• Package Size: 22.00cm * 22.00cm * 100.00cm
• Package Gross Weight: 40.000kg
• Lead Time: 5 days (1 - 1000 Square Meters) ; 10 days (1001 - 10000 Square Meters) ; To be negotiated ( > 10000 Square Meters)

Product Description

EPDM Waterproof Rubber Membrane

Product Description

EPDM waterproof membrane is a commonly used high performance waterproof material, which is made of EPDM rubber. It is resistant to weather, chemicals and aging and is commonly used in building roofing, basements and other areas that require waterproof protection.

EPDM waterproofing membranes are usually sold in roll form and are fixed to the base with hot melt or adhesive during construction. These materials are easy to install and perform well in a variety of climatic conditions.

Product Parameters

Product Name	EPDM Waterproof Membrane
Brand	Jin Lu Yang
Length	20m or customized
Weidth	1.2m , 2.0m
Thickness	1.2mm , 1.5mm , 2.0mm
Color	Black or customized
Remark	Specification can be customized as requirement.

 

 

Detailed Photos

Product Features

1.Excellent anti-aging, long service life about 50years.

2.High elongation, tensile strength, little dimensional changes after heat treatment.

3.Excellent resistance to root puncture, can be used as waterproof layer of green roof.

4.Good flexibility at low temperature, great ability to adapt to the environment changes.

5.Excellent resistance to ozone and UV light, chemical attack, can be applicable to the special environment.

6.Easy to repair, low cost.

7.Excellent resistance to hole-punching.

construction

1.After the basic acceptance is completed, the node parts of the building should be strengthened. In the construction of membrane paving, according to the specific conditions of the project, full paving method, strip paving method, point paving method and empty paving method can be used.
Recommended dosage of adhesive: full lay-up method: 0.33kg/m2, point lay-up method: 0.22kg/m2, strip lay-up method: 0.20kg/m2, empty lay-up method: 0.10 kg/m2, membrane lapping part dosage: 0.10 kg/m2.

2.When the membrane is bonded to the base, the adhesive is evenly coated on the bonding part, and the adhesive is bonded after the surface is dry (slightly sticky but not drawn). When the lap part is bonded, the lap width shall comply with the relevant regulations. Use solvent to wipe the lap part of the membrane clean, remove dirt and grease, and then brush the adhesive, when the adhesive surface dry, the lap part firmly paste, and use rubber roller compaction. If you need to do the finished product protection, you should first do the isolation layer on the waterproof layer, and then do the protective layer.
 

 

 

 

 

Installation Instructions

1.Do not apply self-adhesive membrane to the frozen base surface;
2.It can not be constructed on the base which is polluted and has a high moisture content;
3.Self-adhesive membrane packaging and isolation paper can only be removed before and during placement;
4.When the sealant is used up, the container should be tightly sealed in time;
5.Storage and transportation materials should be stored in a dry, ventilated environment to prevent sun and rain.
6.Different types and specifications of membranes should be stacked separately.
7.Stacking height does not exceed 5 layers is good, vertical do not exceed 2 layers.
8.Under normal conditions, the storage date is one year (from the date of production).

Company Profile

Weifang Luyang Waterproof Material Co., Ltd. is located in Taitou industrial park ,Shouguang City , Weifang City ,Shandong Province. The production base of waterproof materials in China. 

Our factory is specialized in manufacturing and selling the waterproof membrane and the waterproof coating. It covers an area of about 1 0 0 0 0 square meters, 6 technicists and 4 advanced production line.  We can manufacture SBS Modified Bitumen Waterproof Membrane, APP Modified Bitumen Waterproof Membrane, Self adhesive waterproof membrane , Polyethylene Polypropylene/Polyester Compound Waterproof Membrane,TPO Waterproof Membrane, PVC Waterproof membrane ,Self adhesive HDPE waterproof membrane, CPE Waterproof Membrane, EVA Waterproof Membrane, Self adhesive waterproof tape,  Geo-textile, Geo Membrane, Colorful Asphalt Shingle, Polyurethane/silicone /acrylic  Waterproof Coating, Special Waterproof Coating For Metal Roof, Liquid Rubber Asphalt Waterproof Coating, Special Waterproof Coating For High-speed Railway etc. 
 

 

FAQ

 

Q1: Why choose us?

A1:As the professional manufacturer, we can provide the excellent products and best service.

Q2:Sample and quality

A2:The free samples can be provided for quality inspection. And the customer pay the sample freight. The delivery cost will be returned after placing the order.

Q3:Carrier and delivery time of sample

A3:Carrier: DHL, UPS, FedEx, TNT or as customer's requirement.Delivery time: 1-3 working days